Gate Hinges, Latches & Catches
Galvanised fittings for timber garden and livestock gates including catches, bolts, hooks and padlock hasps. Galvanised heavy-duty strong gate hinges for field gates, driveway gates and garden gates. Fully adjustable hinges and hinge kits including the post and gate mountings. Special offer garden gate packs include hinges, bolt and latches.
Free Delivery Available
Same Day Click & Collect
Specialist Support
Installation Quotes
Double Leg Gate Catch Striker
Galvanised u-shaped striker to work with a self-locking latch gate. Legs 180mm long Total width 80mm Leg diameter 10mm
£7.15*
Throw-Over Loop Gate Catch 350mm
A super simple way of firmly holding a gate or gates closed. The throw-over loop is attached to one end of a pair of gates and the loop simply goes over the end of the other gate, holding them both in position. Only one hole requiredMade from galvanised steel for a long life Attachment bolt included.
£19.99*
Curved Rail Gate Hinges - Left handed
Curved Rail Gate Hinges - Left Handed For use with arch top gates 300mm Galvanised
£29.70*
Galvanised Gate Handle
A galvanised handle for use on garden gates, sheds and garden storage bins etc. Galvanised for a long life150mm
£3.00*
Hook on Narrow Plate
Used in conjunction with an adjustable eye, this hook creates the fixed part of a hinging system for garden gates etc. Being narrow allows the hook to be installed onto smaller timbers whilst still spreading the load up and down the plate.Galvanised for a long lifeNarrows for smaller timbers19mm pin
£8.93*
Field Gate Spring Fastener Catch Set
This tough kit includes everything you need for a field gate spring catch. A nice easy install, this is an ideal catch system for a wooden five bar field gate with a frame (end of the gate) up to 75mm thick. The three-part pack includes:The spring (lower part flat upper part round for an easy pull to open the gate) + a latch which is hammered into the post + a spring retainer which slides over the end of the gate. All in one kit made from galvanised steel for a long life Perfect for 5 bar field gatesRetainer 75mm x 155mm to slide over gate and extends 75mm to hold the springSpring total height of 590mmTwo pronged catch (total width from outside edge of the prongs of 60mm)All fixings included
£19.80*
Heavy Duty Gate Ring Latch
A heavy duty galvanised ring latch for garden gates. Includes a ring handle for either side of the gate, latch and keep.Galvanised for a long life150mmHeavy duty
£16.54*
Auto Garden Gate Catch
Simple and efficient, this galvanised steel garden gate catch is easy to install and align . The traditional design is ideal for timber and wooden garden gates and will automatically latch as the gate is pushed closed. The striker (metal bar on the gate side) meets the latch (on the post side).Made from galvanised steel for exterior useMedium size
£3.85*
Braced adjustable band and hook on plate gate hinges
Braced adjustable band and hook on plate hinges that spread the load over two directions, allowing the hinge to be smaller than our standard gate tee hinges. Made from galvanised steel and pre-drilled for easy attachment to your garden gate, these hinges are easily adjustable and include both the fixing for the post, gate and adjustable pad eye (screws not included). The hinges are 350mm long Suited to our square horizontal, square lattice top gate and elite slatted top gates.
£42.00*
Chrome Gate Handle With Lock Surround
This chrome finished handle is ready to receive one of our long throw locks (in situ in the photograph). Can be used on sheds or gates and looks smart.Exterior gradeChrome finish200mm longReady to be used with long throw lock
£12.10*
Adjustable Gate Hinge Set
This adjustable hinge set includes everything you need to attach a wooden or timber field or driveway gate to a gate post. Made from galvanised steel the fitting are designed to be in the elements and withstand weathering. The pack includes fixings to match the hinges.Included in the set:Top band 600mmAdjustable gate eye and heel clipsHook to bolt Hook to drive Complete with fixings
£37.26*
Pedestrian Gate Fixing Kit
This gate fixing kit has everything you need to attach one of our smaller gates such as a palisade picket gate. All fittings are galvanised for a long life and are easy to assemble. The hinges and catches are pre-drilled and we recommend adding undersized pilot holes for the screws into the wooden gate and post prior to adding in screws. Perfect for smaller wooden garden gatesIncludes two 350mm tee hinges and one medium auto-latchAll fittings are made from galvanised steel
£12.36*
Side Gate Fixing Kit Suffolk Latch
An all-in-one side gate fixing kit with a Suffolk latch (see photograph). All fittings are galvanised for a long life and are easy to assemble. The hinges and catches are pre-drilled and we recommend adding undersized pilot holes for the screws into the wooden gate and post, prior to adding in screws. Perfect for taller garden gatesIncludes two 450mm tee hinges, one heavy Suffolk latch and one 150mm Brenton padboltAll fittings made from galvanised steel
£33.05*
Adjustable Gate Eyes
Adjustable Gate Eyes made from galvanised steel to withstand the elements. Easily adjusted by twisting the nuts (included) you will be able to align your gate by adjusting the distance from the post with this fitting. 150mm x 20mmMade from galvanised steelEasily adjusted
£5.00*
Side Gate Fixing Kit Ring Latch
Everything you need to attach one of our taller side gates in one kit. All fittings are galvanised for a long life and are easy to assemble. The hinges and catches are pre-drilled and we recommend adding undersized pilot holes for the screws into the wooden gate and post, prior to adding in screws. Perfect for taller garden gatesIncludes two 450mm tee hinges, one 150mm ring latch and one 150mm Brenton padboltAll fittings made from galvanised steel
£25.31*
Automatic Gate Close Return Spring
An easy way to automatically close garden gates this zinc-plated spring will pull the gate closed (subject to the size of the gate). Helps gates to close automatically200mm springZinc for a long life
£9.35*
Monkey Tail Garage Door Bolt
The ideal bolt for the inside of a garage door. The extended handle on this bolt is a significant help with tall doors where the bolt may be out of reach. Galvanised for a longer lifeIdeal bolt for larger sheds and garages450mm
£12.65*
Suffolk Latch
A heavy duty galvanised traditional gate latch. Includes a ring handle for either side of the gate, latch and keep.
Galvanised for a long life. A simple yet effective latch for taller gates and popular for garden gates. Suffolk Gate Latch200mm x 43mmGalvanisedTwo Parts - easy install
£16.00*
Gate Hasp and Staple for Padlock
Secure your gate with this zinc-plated hasp and staple. Suited to wooden garden gates and shed doors, a padlock easily slots through the d-ring. Zinc plated for a long life150mmEasily attached with screws to a wooden gatePadlock not included
£3.60*
Heavy Duty Reversible Driveway Hinges
Ideal use on all our driveway gates as it
keeps the gate flush when hung on the front or back. A decorative hinge which has cups on the
top and bottom of the pin with a galvanised finish.Heavy duty for driveway gatesGalvanisedHinges designed to help keep the gate flush and can be used in front of or behind the gatePair of hinges
£38.00*
Hunting Type Locking Gate Catch Long Handle
The hunting style of gate catch adds in a raised long reach handle to open the gate. The concept being one can reach down from a horse to open a gate. It is also rather handy to avoid reaching over a gate to open it. Galvanised for a long lifeLong reach handle425mm Striker not included and sold separately
£19.99*
Gravity Gate Catch
Hold a gate open with this galvanised gravity catch. As the gate swings over the front of the catch, the design prevents it from swinging back the other way thanks to the shape of the catch. 350mm Galvanised for a long lifeEasy to install
£31.45*
Self Locking Field Gate Catch
Heavy duty premium galvanised self-locking field gate catch striker fitting (nut, auto grip ring and washer included) and catch attached to the post with included coach screws.Galvanised for a long life in serviceCranked Striker for easy installation and simple useGate to catch striker length 100mmThrough gate striker length 95mm (assume 85mm to allow room for nut)Catch 180mm x 30mm
£11.56*