Devon Pent Shed Weatherboard 8' x 6' Ex Display

An ex-display pent roofed weatherboard clad shed with big savings. Based on our Devon range of sheds with an apex roof and clad in timeless pressure treated weatherboard. It has both a double door at one end and a single door at the other making it incredibly flexible - ideally where two access doors will make like easier or to pass longer items through the shed. 

This shed comes as one of our DIY kits, where you can collect from our workshop in Ashford. Delivery and installation options are also available across the southeast by request.

Specification: 

• Shed size 8' (2.4m) x 6' (1.8m) 
• Floor constructed using EX 1 ½” x 1 ½” (finish size 40mm x 40mm) bearers placed at 12” (300mm) centres, boarded with T&G.

• Roof boarded with 15mm OSB and covered in green slate felt, supported with 5” x 2” purlins, finished with barge board and a diamond finial (on the apex design). 

•  Height to low side of pent approx. 78” (1981mm), height to high side of pent approx. 84” (2134mm) with a pitch of 4.75°. Walls constructed using EX 3”x 2” (finished size 68mm x 38mm) framing. 
• Walls constructed using EX 3”x 2” (finished size 68mm x 38mm) framing. Walls cladded with EX 22mm Weatherboard (Finished size 14mm) and includes breathable lining between framing and exterior cladding (including doors).

•  1 x Single opening window glazed with 4mm glass. 

•  1 x Framed, ledged and braced single personal door measuring 762mm wide x 1830mm high with 3 x 350mm Tee-Hinges, and a long throw key lock with handle. Hook to hold open door. 

• 1 x Framed, ledged and braced double door measuring 1.2m wide x 1830mm high with 3 x 350mm Tee-Hinges, and a long throw key lock with handle.